|
|
Increasing the life of blanking punch by coating
Šplíchal, Jan ; Lidmila, Zdeněk (referee) ; Podaný, Kamil (advisor)
This Bachelor thesis presents possible methods for increasing the lifespan of cutting tools made of steel 19 436 designed for cutting stator and rotor plates made of silicon steel. These sheets are characterized by high hardness, which adversely affects the edges of the scissors. Experimental hardness measurement on delivered samples has verified the actual heat treatment on the surface and inside the scraper. The measured value 62 HRC corresponds to the input requirements. Based on the literature study, a combination of chemical – heat treatment and coating was chosen as the most appropriate method. In order to preserve the microstructure of the punch produced after the heat treatment, it was necessary to apply the coating by physical vapor deposition, which is characterized by low deposition temperatures. The FeinAl coating will be applied by cathodic arc deposition and is primarily designed to protect tools and cutting tools.
|
|
|
Proposal for the production of variants of flat sheet metal parts with holes
Fabík, Pavel ; Hušek, Martin (referee) ; Špaček, Jindřich (advisor)
FABÍK Pavel: Proposal for the production of variants of flat sheet metal parts with holes The project elaborated in frame of bachelor’s study branch B2307-00 submits a design of technology components from sheet metal with holes - parts of steel 11 320.1 (specified by INGE Opava). On the basis of literary study problems of production of the components were designed and compared two methods of production. Cutting on the combined cutter attached to the double-stand hydraulic press type Tleff (designed by KIT Invest Ltd. for the Trading) witch 4000 kN pressing power. The cut parts of cutting tool are made of material 19 312 (as designed by Brano). Laser cutting is done on a machine AMADO FO-3015 (in the company Dender).
|
|
|
Modern cutting cemented carbide tools
Vopařil, Josef ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
This thesis is focused on cutting tools made of cemented carbides. It contains analysis of cemented carbides for uncoated and coated cutting tools. It contains examples of modern tools for turning, milling and drilling. Practical part of this thesis evaluates and compares cutting properties of two types of spiral drills.
|
|
|
The manufacture of seat belt buckle
Oborný, Roman ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
Aim of this Thesis is to assess the existing manufacturing method and to propose and make out an optimum manufacturing method for the part „seat belt buckle“. Components made of the steel plate 14 220.3. With respect to requested accuracy, quality and expected production run of 1 000 000 pcs per year, the Thesis includes the proposal of manufacture of the part by a method of accurate cutting with push-on edge. Is designed the cutting tool and selected the suitable machine type for this technology Feintool HFA 3200 Plus. The work contains necessary calculations, economical evaluation and design documentation of the processual tools for the components production. The last part contains the technical and economic evaluation, from which results that, technically and economically, the new production technology is preferable to the existing technology.
|
|
|
The Study of Economics of Tooling Technology
Ondrášek, Dušan ; Humár, Anton (referee) ; Jurová, Marie (advisor)
The aim of this diploma thesis addresses issues related to obtaining methodology for the production manager´s decision-making process in the field of technology selection, suitable tooling and cutting tools selection for a specific order or particular production plan. Evaluation of the manufacturing process while taking into consideration complexion of process controlling and contexture to the economy of this process. Analysis and evaluation of technological and economical aspects of a manufacturing process of the CNC chip machining in a real environment is targeted on the field of tooling, its selection, purchase, economy and consumption. The process controlling of technology is based on this analysis as well as the formulation of measuring by economic indicators such as economy, productivity, profitability etc. The analysis of important factors and parameters of this process demonstrated an influence on economy of the company. Several model cases have been created from the company records and from the provided research, the output of which became a basic methodology. The output of the analysis indicates possible directions of a management decision making. Thanks to a complex technical-economic view this thesis can serve as a methodological instrument for decision makers in the field of technology and cutting tool selections as well as an economy of production process improvement.
|
|
| |
|
|
Manufacturing of protective sheet metal to the door
Popelář, Martin ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The thesis deals with the design of manufacturing technology of protective sheet metal to the door from the material 17240. The blank is 0,8 mm thick sheet metal. Work is set for cold shaping of metal by means of cutting. Production on sequence shearing tool is based on series 100 000 pieces. Shearing machine LEXN–100 2 (Toma trading s.r.o.) with shearing force 1000 kN is selected for realization. The main point of the thesis is to design a cutting tool and to create a drawing documentation.
|
|
|
The Manufacturing of the Brake Disk by Fineblanking Technology
Kantor, Miroslav ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The purpose of the diploma thesis is to design a manufacturing technology of the Brake Disk. The component is made of stainless steel 17 023 (X30Cr13). The blank is 2 mm thick sheet metal. Within the literary study the comparison of the possible technologies of manufacturing has been carried out. With respect to the batch size 200 000 pieces the fineblanking technology has been chosen. For the manufacturing has been chosen HFA 700 press. The major point of diploma thesis is to design a cutting tool and create a drawing documentation. The part of the project is the technical and economical evaluation of the designed manufacturing process.
|
|
|
Modern cutting cemented carbide tools
Štefek, Jaromír ; Kalivoda, Milan (referee) ; Píška, Miroslav (advisor)
This thesis deals with modern cutting cemented carbide tools. In the first section are stated several basic innovations already used tools for basic machining operations, which is turning, milling and drilling. It continues with analysis of single materials for production of cemented carbides, non coated as well as coated and with comparing of their properties. There are listed the basic cutting properties of the cutting tools after that. The penultimate point of the work is optimization of the basic machining operations, namely roughing and finishing, for a given application, which is in this case turning on the lamp stand. Finally, everything is summed up and evaluated in the conclusion.
|
|
| |
guest ::
